 Friends links |
|
| Picture |
Heading |
Updated |
 |
VENZO 640 Shock Test System
VENZO 640 Shock Test System Features · Capture transient signals with specified trigger level, slop and position · 100Mbps Ethernet port connection · Capture Duration: 1ms-10,000ms · Pulse Duration: 0.05ms to 5,000ms · Maximum sampling rate up to 204.8 kH |
2017-12-15 |
 |
VESSTA 18EX MIMO Vibration Controller
Based on the impedance matrix decoupling control with compensation, can accurately control the reference waveform, for online control of error correction, to adapt the system characteristics of nonlinear changes of different kinds of situation. |
2017-12-14 |
 |
General Purpose Single Axis Accelerometers
Piezoelectric accelerometers, both IEPE and charge mode types, are designed for the applications where the actual acceleration rang is unknown, or where shock and vibration measurements are required. IEPE accelerometers featured integral electronics, and |
2017-12-11 |
 |
VENZO 8160 Vibration Controller
Main Classis·Dimension (mm):290*210*60 (VENZO 820); 390*280*60 (VENZO 880); 430*280*60 (VENZO 8160)·Weight:2.6 kg (VENZO 820), 4.2 kg (VENZO 880), 5.0 kg (VENZO 8160) |
2017-12-05 |
 |
VENZO 880 Vibration Controller
Wave Types: Half-sine, Haversine, Initial and final Peak Saw Tooth, Triangle, Rectangle and Trapezoid.Negative Pulse: Pulses can be in negative directionAveraging: Pulses can be averaged for the control. |
2017-12-04 |
 |
VESSTA 9EX MIMO Vibration Controller
Based on the impedance matrix compensation decoupling control, it can accurately control the coherence and the phase between the reference spectrums, achieve online control error correction, to adapt the system characteristics nonlinear |
2017-11-20 |
 |
VENZO 820 Vibration Controller
Rear Panel: connectors include 2/8 Analog Input Channels, a Drive Channel, a100 BASE-T Network Port, an AUX channel (only for VENZO 880, can be adjusted to 2-axis drive control channel), a grounding-end, an External Emergency Abort Jack and a terminal blo |
2017-11-04 |
 |
VESSTA 4EX MIMO Vibration Controller
VESSTA MIMO Vibration controller is based on PXIe Bus and DSP board Structure, by the combination of different data acquisition card and output interface card, it can realize large-scale-channel distributed data acquisition |
2017-10-15 |
|
